How it is worked out
Sheets = length × width × (1 + waste) ÷ sheet area
A worked example
A floor 16 by 12 feet is 192 square feet. With 10% waste that is 211, or 6.6 sheets of 4 by 8, so buy 7.
Good to know
- Stagger the joints and run the long edge across the joists or studs.
- Leave an eighth of an inch between sheets for swelling.
How we know this calculator is right
Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.