Every Single CalculatorOne place for every calculator

Tile calculator

Enter the size of the floor or wall and the size of your tile to find how many tiles and boxes to buy.

Example: You are tiling a bathroom floor in 12 by 24 tile and need the tile count with waste, plus bags of thinset.

Your numbers

Enter the tile size in inches. For a wall, use the wall width and height as the length and width.

ft
ft
in
in
in
⅛ inch is common.
%
15 for a diagonal layout.
Check the carton.
sq ft
Depends on trowel size. Check the bag.
Drawn from your numbers. It redraws as you type.
  • Tiles needed0
  • Boxes0
  • Area0
  • Bags of thinset0

Tile calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How the tile count is worked out

Each tile takes up its own size plus one grout joint. Divide the area by that, add waste and round up.

Tiles = area × 144 ÷ ((tile length + joint) × (tile width + joint)) × (1 + waste)

A worked example

A floor 10 by 8 feet is 80 square feet. A 12 inch tile with a ⅛ inch joint takes up 12⅛ inches each way, so the floor needs 78.4 tiles. With 10% waste that is 86.2, so you buy 87 tiles, or 9 boxes of 10.

Good to know

  • Buy all the tile at once and check that the boxes share the same shade and calibre numbers. Batches vary.
  • Large tiles and diagonal layouts waste more, because every edge cut is bigger. Use 15%.
  • Thinset coverage depends heavily on the trowel notch. Large tiles need a bigger notch and more mortar, so a bag may cover only half as much.
  • Grout quantity depends on joint width, joint depth and tile size. The grout bag has a coverage chart for your combination.
  • Plan the layout from the centre of the room so the cut tiles at opposite walls are the same width.

Common questions

Should I subtract the area under cabinets or a tub?

Yes if you are not tiling there. Measure only the area that gets tile.

What about wall tile with a border or niche?

Work out the main field with this calculator, then count border and trim pieces by the linear foot.

How we know this calculator is right

Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: flooring installers, tile setters, handymen, homeowners.