Every Single CalculatorOne place for every calculator

Floor joist calculator

Enter the size of a floor to find how many joists it takes, how much rim board and how many sheets of subfloor.

Example: You are framing an addition floor 24 by 14 feet and need the joist count, rim board and subfloor sheets.

Your numbers

This counts the lumber. It does not tell you what size the joists must be. That comes from the span tables in your building code.

ft
The direction the joists are spaced along.
ft
The distance each joist spans.
in
12, 16 or 24 on center.
%
  • Joists0
  • Rim board0
  • Subfloor sheets0
  • Floor area0

Floor joist calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How the count is worked out

Divide the floor length by the joist spacing and add one for the joist at the end. The rim boards run along both ends of the joists, so they total twice the floor length.

Joists = floor length × 12 ÷ spacing, rounded up, + 1

Subfloor sheets = floor area × (1 + waste) ÷ 32

A worked example

A floor 24 feet long with joists every 16 inches is 288 inches, which is 18 spaces, so 19 joists. Each is 14 feet long. The rim board is 48 feet. The floor is 336 square feet, and with 5% waste that takes 12 sheets of 4 by 8 subfloor.

Good to know

  • Joist size depends on span, spacing, wood species and grade, and the load on the floor. Use the span tables in your code or have the floor designed. Never guess.
  • Add extra joists under walls that run parallel to the joists, under bathtubs and around stair openings.
  • Subfloor is usually ¾ inch tongue and groove, glued and screwed or nailed, laid across the joists with the end joints staggered.
  • Blocking or bridging at mid-span is extra to the figures here.

Common questions

16 or 24 inch spacing?

Sixteen is the common default for dimensional lumber. Engineered I-joists are often spaced at 19.2 or 24 inches. Closer spacing makes a stiffer floor.

Does this work for a deck?

The joist count does. Deck boards are covered by the deck board calculator.

How we know this calculator is right

Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: framers and carpenters.