How the roofing cost is worked out
Roofers price by the square, which is 100 square feet of roof. Materials are bought for the roof area plus waste. Labor and tear-off are charged on the roof itself.
Total = (squares + waste) × material price + squares × (labor + tear-off) + other costs
A worked example
A 1,500 square foot roof is 15 squares. With 10% waste you order 16.5 squares, which at $120 a square is $1,980 in materials. Labor at $250 a square is $3,750 and tear-off at $100 a square is $1,500. Add $500 for a permit and dumpster and the job comes to $7,730, or $5.15 per square foot.
Getting numbers you can trust
- Ask each roofer to break a bid into materials, labor and tear-off so you can enter them here and compare.
- Steep roofs cost more in labor. Many roofers add a charge above about 6/12 pitch because the crew needs staging and harnesses.
- A second layer of old shingles roughly doubles the tear-off work.
- Rotten decking is usually priced per sheet once the old roof is off. Keep some budget aside for it.
Common questions
What is a roofing square?
One square covers 100 square feet. A 1,500 square foot roof is 15 squares.
Why is my roof area bigger than my house?
The roof is sloped and overhangs the walls, so it covers more surface than the floor plan. A 6/12 roof is about 12% larger than the flat area under it.
Does this include gutters?
No. Use the gutter calculator for those and add the cost under other costs.
How we know this calculator is right
Before this calculator went on the site, 9 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.