Every Single CalculatorOne place for every calculator

Rainwater calculator

Enter the footprint of the roof and the depth of rain to find how many gallons come off it.

Example: A customer wants rain barrels on two downspouts and asks how fast they will fill.

Your numbers

Use the footprint of the roof on the flat, not the sloped area. Rain falls on the plan area whatever the pitch.

ft
ft
in
%
Some is lost to splash and evaporation.
gal
Drawn from your numbers. It redraws as you type.
  • Water collected0
  • Barrels to hold it0
  • Gallons per inch of rain0
  • Roof footprint0

How the amount is worked out

One inch of rain on one square foot is 0.623 gallons.

Gallons = roof footprint × rainfall in inches × 0.623 × share collected

A worked example

A roof 40 by 30 feet has a footprint of 1,200 square feet. One inch of rain puts 748 gallons on it, and at 90% collected that is 673 gallons. It would fill 13 barrels of 55 gallons.

Good to know

  • A single rain barrel fills in the first few minutes of a decent storm. Fit an overflow that carries the rest away from the foundation.
  • The same figure shows how much water your gutters, downspouts and drains have to handle.
  • Some places restrict or regulate rainwater collection. Check before you fit a large tank.
  • Roof runoff is fine for gardens but is not drinking water without proper treatment.

Common questions

How much could I collect in a year?

Enter your annual rainfall in inches in place of one storm. Thirty inches a year on this roof is about 20,000 gallons.

How we know this calculator is right

Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: landscapers, irrigation installers.