Every Single CalculatorOne place for every calculator

Two-stroke oil mix calculator

Ounces of two-stroke oil for a can of gas at a given ratio.

Example: You are filling a 2½ gallon can for the saws and trimmers.

Your numbers

The ratio is in the manual or on the fuel cap. 50 to 1 is the most common for modern saws and trimmers.

gal
  • Oil to add0
  • In milliliters0

How it is worked out

Ounces of oil = gallons of gas × 128 ÷ ratio

A worked example

One gallon at 50 to 1 takes 128 ÷ 50, or 2.56 ounces of oil. Five gallons at 40 to 1 takes 16 ounces.

Good to know

  • Too little oil seizes an engine. If two tools want different ratios, keep two cans and label them.
  • Mixed fuel goes stale in a month or two.

How we know this calculator is right

Before this calculator went on the site, 3 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: lawn care and mowing, mechanics, tree service and firewood.