How the roll count is worked out
Rolls = (wall area − doors − windows) × (1 + waste) ÷ coverage per roll
A worked example
A 12 by 12 foot room with 8 foot walls has 384 square feet of wall. One door and two windows take out 51, leaving 333. With 10% waste that is 366 square feet, which takes 15 rolls at 25 usable square feet each.
Good to know
- Buy every roll from the same batch. The batch or run number is printed on the label, and colours shift between runs.
- A large pattern repeat wastes more, because each strip has to be shifted to line up with the last. Allow 15 to 20%.
- Wallpaper is often priced by the single roll but sold in double rolls. Check which one the coverage figure refers to.
- Order one extra roll for repairs later.
Common questions
How do I work out an accent wall?
Multiply the wall width by its height, take out any openings and divide by the roll coverage. Round up, and add a spare roll.
How we know this calculator is right
Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.