How the amount is worked out
Multiply the bed area by the depth in feet to get cubic feet. Divide by 27 for cubic yards, or by the bag size for bags.
Cubic feet = length × width × (depth ÷ 12)
A worked example
A bed 20 by 10 feet with 3 inches of mulch needs 50 cubic feet. That is 1.85 cubic yards if you order in bulk, or 25 bags of 2 cubic feet.
Bulk or bags?
- Bulk is usually much cheaper per yard once you need more than about a yard, but there may be a delivery fee and a minimum.
- Bags are easier to carry to a back garden and to store if you have some left.
- One cubic yard covers about 108 square feet at 3 inches deep, or 162 square feet at 2 inches.
Good to know
- Keep mulch a few inches back from tree trunks and the siding of the house. Piled against either, it holds moisture and invites rot and pests.
- More than 4 inches can stop water and air reaching the roots.
- If you are topping up an old layer, measure the depth you are adding, not the total.
Common questions
How do I measure a curved or round bed?
For a round bed, use the square footage calculator to get the area, then enter that as the length with a width of 1.
Does this work for compost, topsoil or stone?
Yes for the volume. For stone or soil sold by weight, use the gravel calculator, which converts to tons.
How we know this calculator is right
Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.