Every Single CalculatorOne place for every calculator

Deck screw calculator

Screws to fasten deck boards, from the deck size and joist spacing.

Example: You are buying fasteners for a 16 by 12 deck and do not want to run out on the last row.

Your numbers

Two screws go through every board at every joist.

ft
ft
in
in
in
%
  • Screws0
  • Rows of boards0
  • Joists0

Deck screw calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How it is worked out

Screws = rows of boards × joists × 2 × (1 + extra)

A worked example

A 16 by 12 foot deck has 26 rows of boards over 13 joists. Two screws at each crossing is 676, or 744 with 10% extra.

Good to know

  • A pound of 2½ inch deck screws is roughly 85 to 100 screws. The box says.
  • Hidden clip systems use one clip per joist per board instead.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: framers and carpenters, deck and fence builders.