How the quantities are worked out
Main runners hang 4 feet apart, so the room needs a quarter of its area in feet of runner. Four foot cross tees go between them every 2 feet. A 2 by 2 grid adds a 2 foot tee between each pair.
Tiles = room area ÷ tile area × (1 + waste)
Main runner = room area ÷ 4, in feet
A worked example
A room 20 by 12 feet is 240 square feet. In 2 by 4 tiles that is 30, or 32 with spare. It needs 60 feet of main runner, which is 5 twelve-foot pieces, and 30 four-foot cross tees. The walls are 64 feet round, so 7 ten-foot pieces of wall angle. Hanger wires every 4 feet along the runners come to 15.
Good to know
- Plan the grid so the cut tiles at opposite walls are the same width, and no narrower than half a tile. That can add a row of tees.
- Run the main runners across the joists so every hanger wire has something solid to fix to.
- Leave at least 3 to 4 inches above the grid to get the tiles in, and more if there are light fixtures.
- Lights, vents and speakers each replace a tile. Heavy fixtures need their own support wires.
Common questions
2 by 2 or 2 by 4 tiles?
Two by four is quicker and cheaper to install. Two by two sags less and usually looks more finished.
How we know this calculator is right
Before this calculator went on the site, 13 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.