How the volume is worked out
Multiply length by width by thickness, with the thickness converted to feet. That gives cubic feet. There are 27 cubic feet in a cubic yard.
Cubic yards = length × width × (thickness ÷ 12) ÷ 27
A worked example
A 10 by 10 foot slab 4 inches thick is 33.3 cubic feet. With 10% extra that is 36.7 cubic feet, or 1.36 cubic yards. An 80 lb bag makes about 0.60 cubic feet, so you would need 62 bags. A 60 lb bag makes about 0.45 cubic feet, which is 82 bags.
Bags or a truck?
- Past about one cubic yard, mixing by hand gets hard to keep up with. Sixty bags is a long day even with a mixer.
- Ready-mix suppliers often have a minimum load or a short-load fee. Ask before you order a small amount.
- Always round up. Running short in the middle of a pour leaves a weak joint in the slab.
Common questions
How thick should my slab be?
Four inches is typical for patios, paths and shed floors. Use five or six where cars or heavy equipment will sit. Check local code for anything structural.
Does this include the gravel base?
No. The base is a separate layer, usually 4 inches of compacted gravel. Run the calculator again with the base thickness to get its volume.
What about a round slab?
Work out the area as 3.14 times the radius squared, then enter that as the length with a width of 1.
How we know this calculator is right
Before this calculator went on the site, 11 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.