Every Single CalculatorOne place for every calculator

Engine RPM calculator

Engine RPM at a road speed from the axle ratio, gear and tire size.

Example: You are choosing axle gears for a truck that tows on the highway.

Your numbers

Use 1 for the transmission ratio in direct drive, or the overdrive ratio such as 0.7.

mph
in
  • Engine speed0

How it is worked out

RPM = mph × axle ratio × gear ratio × 336 ÷ tire diameter

A worked example

At 65 mph with 3.73 gears, direct drive and 30 inch tires: 65 × 3.73 × 336 ÷ 30 is about 2,716 RPM.

Good to know

How we know this calculator is right

Before this calculator went on the site, 2 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: mechanics.