How it is worked out
Displacement = 0.7854 × bore × bore × stroke × cylinders
A worked example
A V8 with a 4.00 inch bore and 3.48 inch stroke: 0.7854 × 16 × 3.48 × 8 is 349.8 cubic inches, the classic 350, or 5.7 liters.
Good to know
- Boring a block 0.030 over adds a few cubic inches. Enter the new bore to see how many.
- One cubic inch is 16.387 cc.
How we know this calculator is right
Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.