How the weight is worked out
Weight = roof squares × weight per square × layers
A worked example
A 1,500 square foot roof is 15 squares. One layer at 250 pounds per square is 3,750 pounds, or 1.88 tons, which fits in one dumpster with a 3 ton limit. Two layers of heavier shingles on a 3,000 square foot roof come to 9 tons and three loads.
Good to know
- Haulers charge extra for every ton over the limit, and an overloaded dumpster may not be picked up at all. Ask for the limit before you order.
- Felt, nails, flashing and any rotten decking add to the weight. Allow 10 to 15% on top.
- Wet shingles weigh more. Keep the dumpster covered if rain is coming.
- Some areas have shingle recycling, which can cost less than landfill.
Common questions
How do I know how many layers I have?
Look at the edge of the roof at the rake. Each layer shows as a separate thickness of shingle. Most codes allow no more than two before everything has to come off.
How we know this calculator is right
Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.