How the amount is worked out
Multiply the lawn length by its width, add a little for the cuts around edges, and divide by what one roll or pallet covers.
Rolls = length × width × (1 + waste) ÷ roll coverage
A worked example
A lawn 50 by 30 feet is 1,500 square feet. With 5% waste you need 1,575 square feet. That is 158 rolls of 10 square feet, or 4 pallets of 450.
Good to know
- Sod is perishable. Have the ground graded, raked and ready before it is delivered, and lay it the same day.
- Stagger the joints like brickwork and butt the edges tight without overlapping.
- Water it heavily straight away and keep it moist for the first two weeks while the roots take.
- Take driveways, paths, beds and the footprint of the house out of the area before you order.
Common questions
How much topsoil do I need under sod?
Four to six inches of good soil is a common recommendation. The mulch calculator works out the volume for any depth.
How do I measure an irregular lawn?
Split it into rectangles and triangles, find each area with the square footage calculator and add them up.
How we know this calculator is right
Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.