Markup and margin are not the same
Both describe the same profit, measured against different things. Mixing them up is one of the most common ways a contractor underprices work.
Price = cost × (1 + markup)
Margin = profit ÷ price
A worked example
A job costs you $1,000. A 25% markup makes the price $1,250 and the profit $250. That $250 is only 20% of the price, so your margin is 20%, not 25%.
If you needed a true 25% margin, the price would have to be $1,000 ÷ 0.75, which is $1,333.33. The last figure in the calculator shows that price.
Quick reference
- 20% markup is a 16.7% margin.
- 25% markup is a 20% margin.
- 50% markup is a 33.3% margin.
- 100% markup is a 50% margin.
Good to know
- Job cost should include overhead: insurance, vehicles, tools, office time and your own wage. Profit is what is left after all of that.
- If your overhead runs at 25% of sales and you mark up cost by 25%, you are losing money on every job.
- Work out the margin your business needs first, then convert it to a markup to apply to your costs.
Common questions
How do I turn a margin into a markup?
Divide the margin by one minus the margin. A 30% margin is 0.30 ÷ 0.70, which is a 42.9% markup.
What margin should a contractor aim for?
It depends on your overhead and your trade, so there is no single right figure. Know your own overhead first, and price to cover it with profit on top.
How we know this calculator is right
Before this calculator went on the site, 10 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.