How the airflow is worked out
Find the volume of the room, multiply by the number of air changes you want each hour, and divide by 60 to get a figure per minute.
CFM = length × width × height × air changes per hour ÷ 60
A worked example
A room 12 by 10 feet with an 8 foot ceiling holds 960 cubic feet of air. Eight air changes an hour needs 960 × 8 ÷ 60, which is 128 CFM. At that rate the air is replaced every 7½ minutes.
Good to know
- A common shortcut for bathrooms up to about 100 square feet is 1 CFM for each square foot of floor, with a 50 CFM minimum.
- A fan moves less air than its label says once it is pushing through ductwork. Long runs, small ducts and elbows all cut the flow, so choose a fan with some margin.
- Exhaust fans need somewhere for replacement air to come from. A tightly sealed room will starve the fan.
- This calculator is for ventilation only. Sizing heating and cooling equipment needs a full load calculation.
Common questions
What are air changes per hour?
How many times the whole volume of air in the room is replaced in an hour. More changes clear moisture, fumes and smells faster.
Does a bigger fan always work better?
Not if the duct is too small for it. An oversized fan on a small duct is noisy and may move no more air than a correctly sized one.
How we know this calculator is right
Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.