How the volume is worked out
Multiply length by width by depth for cubic feet, and divide by 27 for cubic yards. That is the volume in the ground. Multiply by the swell to get the loose volume in the truck.
Loose cubic yards = length × width × depth ÷ 27 × (1 + swell)
A worked example
A basement dig 30 by 20 feet and 4 feet deep is 2,400 cubic feet, or 88.9 cubic yards in the ground. With 25% swell it becomes 111.1 loose yards, which is 12 loads in a 10 yard truck.
Good to know
- Trucks are limited by weight as well as volume. Wet clay may fill a truck to its legal weight before the bed is full.
- Holes for foundations are dug wider than the building, to leave working room and to slope the sides. Measure the top of the hole, not the footprint.
- Trenches and excavations deeper than 5 feet must be sloped, benched or shored to protect anyone working in them. Cave-ins kill. Follow your local safety rules.
- Call 811 before you dig.
Common questions
How much fill do I need to bring back?
Compacted fill shrinks. As a planning figure, order 10 to 15% more loose material than the space you need to fill, depending on the soil.
What if the sides are sloped?
Use the average of the top and bottom measurements for the length and the width. That gives a close estimate.
How we know this calculator is right
Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.