How it is worked out
Expansion = coefficient × length in inches × temperature change
A worked example
One hundred feet of copper heated by 100 degrees grows 1.13 inches. The same run in CPVC grows about 4 inches.
Good to know
- Coefficients used, in millionths of an inch per inch per degree F: copper 9.4, steel 6.5, PVC 30, CPVC 34, PEX 92.
- Allow for movement with loops, offsets or expansion joints, and do not clamp long runs hard at both ends.
- Use the pipe maker's figures for a design. Products vary.
How we know this calculator is right
Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.