Every Single CalculatorOne place for every calculator

Solar panel output calculator

Enter the number of panels, their wattage and your peak sun hours to estimate the energy they make.

Example: A customer asks roughly how much of their bill 20 panels would cover.

Your numbers

Peak sun hours is a figure for your location, usually between 3 and 6. Your installer or a solar map has it.

W
h
%
  • Energy per day0
  • Per month0
  • Per year0
  • System size0

How it is worked out

Energy per day = panels × watts ÷ 1,000 × peak sun hours × system efficiency

A worked example

Twenty 400 watt panels are an 8 kilowatt system. At 5 sun hours and 80% efficiency they make 32 kilowatt-hours a day, about 11,700 a year.

Good to know

  • The efficiency figure covers inverter losses, wiring, heat and dirt. Shade and a poor roof direction lower it more.
  • Output swings a lot by season. This is a yearly average.
  • This is an energy estimate only. The electrical design must be done by a qualified installer.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: electricians, solar installers.