Every Single CalculatorOne place for every calculator

Cabinet door size calculator

Enter the cabinet opening and the overlay to find the size to make or order the doors.

Example: You are refacing a kitchen and ordering new doors for face-frame cabinets with half inch overlay hinges.

Your numbers

Overlay is how far the door covers the frame on each side. Half an inch is common on face-frame cabinets.

in
in
in
in
  • Door width0
  • Door height0
  • Doors0

How it is worked out

One door: width = opening + 2 × overlay

A pair: width = (opening + 2 × overlay − gap) ÷ 2

Height = opening + 2 × overlay

A worked example

A 15 by 30 inch opening with ½ inch overlay takes one door 16 by 31 inches. As a pair with a ⅛ inch gap, each door is 7 15/16 inches wide.

Good to know

  • Check your hinges. Each hinge is made for a set overlay.
  • For inset doors, take the opening size and subtract the reveal on every side.
  • Measure every opening. Old cabinets are rarely the same twice.

How we know this calculator is right

Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: finish carpenters, cabinetmakers and woodworkers.