Every Single CalculatorOne place for every calculator

Sprayer tank mix calculator

Enter your tank size, how much spray you put down per 1,000 square feet, and the product rate from the label.

Example: You are spraying a 12,000 square foot lawn with a backpack and need the ounces per tank.

Your numbers

Find your spray volume by spraying a measured 1,000 square feet with plain water and seeing how much it took.

gal
gal
oz
  • Product per tank0
  • One tank covers0
  • Product per gallon of water0

How it is worked out

Area per tank = tank size ÷ spray volume per 1,000 sq ft × 1,000

Product per tank = label rate × tank size ÷ spray volume

A worked example

A 4 gallon backpack putting down 1 gallon per thousand covers 4,000 square feet. At 1.5 ounces per thousand it needs 6 ounces of product.

Good to know

  • The label is the law for pesticides and herbicides. Never go over its rate.
  • Recheck your spray volume when you change nozzles, pressure or walking speed.
  • Mix only what you will use that day.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: lawn care and mowing, pest control and spray technicians, farm and ranch.