Every Single CalculatorOne place for every calculator

BTU, tons and kW calculator

Enter a heating or cooling capacity in one unit to see it in the other two.

Example: An equipment spec lists 36,000 BTU per hour and the customer asks what size that is in tons.

Your numbers

One ton of cooling is 12,000 BTU per hour. One kilowatt is about 3,412 BTU per hour.

  • BTU per hour0
  • Tons of cooling0
  • Kilowatts0

The conversions

Tons = BTU per hour ÷ 12,000

Kilowatts = BTU per hour ÷ 3,412

A worked example

An air conditioner rated at 36,000 BTU per hour is a 3 ton unit. That is 10.55 kilowatts of cooling capacity.

Good to know

  • A ton of cooling is the rate of heat needed to melt one ton of ice in 24 hours. It measures capacity, not weight.
  • The kilowatts here are cooling or heating output, not the electricity the unit draws. An efficient unit uses far fewer electrical kilowatts than it delivers.
  • Residential units come in half-ton steps: 18,000, 24,000, 30,000, 36,000 BTU per hour and so on.
  • This converts units. It does not tell you what size a building needs. That takes a load calculation that accounts for insulation, windows, climate and air leakage.

Common questions

Is bigger better for air conditioning?

No. An oversized unit cools the air quickly and shuts off before it has removed the humidity, which leaves the house cold and clammy.

How we know this calculator is right

Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: hvac technicians, unit conversions.