Every Single CalculatorOne place for every calculator

Pool chlorine calculator

Liquid chlorine to raise a pool's free chlorine by a set amount.

Example: A pool tests at 1 ppm and you want it at 3.

Your numbers

Liquid pool chlorine is usually 10 or 12.5%. Household bleach is weaker. The strength is on the jug.

gal
ppm
%
  • Liquid chlorine to add0
  • In gallons0

How it is worked out

Gallons of chlorine = ppm × pool gallons ÷ (strength % × 10,000)

A worked example

One gallon of 12.5% chlorine raises 10,000 gallons by 12.5 ppm. To raise it by 2 ppm you need 0.16 gallons, about 20 fluid ounces.

Good to know

  • Test first, and again after the pump has run for an hour.
  • Never mix pool chemicals together, and follow the label. Add chemicals to water, not water to chemicals.

How we know this calculator is right

Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: pool builders and service.