How it is worked out
Weight = length × width × (thickness ÷ 12) × 150
A worked example
A slab 10 by 10 feet and 4 inches thick is 33.3 cubic feet. At 150 pounds each that is 5,000 pounds, or 2½ tons.
Good to know
- A cubic yard of concrete is 27 cubic feet and weighs about 4,050 pounds, roughly two tons.
- Use this for hauling and disposal. Lifting and structural loads need an engineer.
How we know this calculator is right
Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.