How it is worked out
Heat needed = gallons × 8.34 × temperature rise
Hours = heat needed ÷ (heater BTU per hour × efficiency)
A worked example
Raising 10,000 gallons by 10 degrees takes 834,000 BTU. A 100,000 BTU heater at 80% delivers 80,000 an hour, so about 10½ hours.
Good to know
- Heat lost from the surface while heating makes it longer, especially uncovered and in wind. A cover makes the biggest difference.
How we know this calculator is right
Before this calculator went on the site, 3 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.