Every Single CalculatorOne place for every calculator

Shielding gas calculator

Hours of welding from a cylinder of shielding gas at a given flow.

Example: You are deciding whether one cylinder will last through a weekend job.

Your numbers

Flow is set on the regulator in cubic feet per hour.

cu ft
CFH
  • Arc time0
  • In minutes0

How it is worked out

Hours = cylinder cubic feet ÷ flow in CFH

A worked example

A 125 cubic foot cylinder at 25 CFH gives 5 hours with the trigger pulled.

Good to know

  • This is arc-on time. Most welders spend well under half the day with the arc lit.
  • More flow is not better. Too much pulls air into the weld.

How we know this calculator is right

Before this calculator went on the site, 3 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: welders and fabricators.