Every Single CalculatorOne place for every calculator

Sand calculator

Cubic yards, tons and bags of sand for an area and depth.

Example: You are bedding a 10 by 10 paver patio.

Your numbers

Paver bedding is 1 inch. A sandbox is usually 6 to 12.

ft
ft
in
cu ft
Drawn from your numbers. It redraws as you type.
  • Sand needed0
  • In tons0
  • Or in bags0
  • In cubic feet0

Sand calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How it is worked out

Cubic yards = length × width × (depth ÷ 12) ÷ 27

A worked example

A 10 by 10 foot area 2 inches deep takes 16.7 cubic feet of sand, 0.62 cubic yards, a little under a ton.

Good to know

  • A 50 pound bag of sand is about half a cubic foot.
  • Use coarse concrete sand under pavers, not fine play sand.

How we know this calculator is right

Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: concrete contractors, masons, landscapers, excavation and grading.