Every Single CalculatorOne place for every calculator

Wainscoting spacing calculator

Enter the wall length, the number of panels and the width of the stiles between them to find the panel width.

Example: You are adding picture frame molding to a dining room wall and want four equal boxes.

Your numbers

There is one more stile than there are panels, with a stile at each end of the wall.

in
in
  • Width of each panel0
  • Stile to stile, center to center0
  • Stiles0

How it is worked out

Panel width = (wall length − (panels + 1) × stile width) ÷ panels

A worked example

A 12 foot wall is 144 inches. Four panels have five stiles of 3½ inches, which take 17½ inches. The other 126½ inches split into four panels of 31⅝ inches.

Good to know

  • Try different panel counts until the width looks right for the room. Panels a little taller than they are wide usually look best.
  • Lay out each wall on its own. Try to keep panel widths close from wall to wall.
  • Watch for outlets and switches landing on a stile and adjust before you nail.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: finish carpenters.