Every Single CalculatorOne place for every calculator

Tire size calculator

Enter the three numbers from the sidewall to find how tall the tire is.

Example: You are putting bigger tires on a work truck and want to know how much taller they are.

Your numbers

A size such as 225/65R17 is the width in millimeters, the sidewall as a percentage of the width, and the wheel diameter in inches.

mm
in
  • Overall diameter0
  • Sidewall height0
  • Circumference0
  • Revolutions per mile0

How it is worked out

Sidewall = width × aspect ratio ÷ 100 ÷ 25.4

Diameter = wheel diameter + 2 × sidewall

A worked example

A 225/65R17 has a sidewall of 225 × 0.65 ÷ 25.4, or 5.76 inches. Twice that plus the 17 inch wheel is 28.5 inches tall.

Good to know

  • A taller tire makes the speedometer read low. The error is the difference in diameter as a percentage.
  • Actual sizes vary a little by maker and wear.
  • Load rating and speed rating must match the vehicle. They are not part of this sum.

How we know this calculator is right

Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: mechanics.