Every Single CalculatorOne place for every calculator

Brick calculator

Enter the size of a wall and the size of your brick to find how many bricks and how much mortar to buy.

Example: A customer wants a brick veneer front on a 30 foot wall. Enter the brick size they chose to get the count and the mortar.

Your numbers

The starting sizes are for a modular brick, 7⅝ inches long and 2¼ inches tall, with a ⅜ inch joint. This is for a wall one brick thick.

ft
ft
in
in
in
sq ft
%
80 lb bag. Check the bag.
Drawn from your numbers. It redraws as you type.
  • Bricks to buy0
  • Bricks per square foot0
  • Bags of mortar0
  • Wall area0

Brick calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How the brick count is worked out

Each brick takes up its own face plus one mortar joint along its length and one along its height.

Bricks per sq ft = 144 ÷ ((brick length + joint) × (brick height + joint))

A worked example

A modular brick with a ⅜ inch joint takes up 8 by 2⅝ inches, which gives 6.86 bricks per square foot. A wall 20 by 8 feet is 160 square feet, so it needs 1,097 bricks. With 5% waste you buy 1,152. At 35 bricks per bag, the mortar comes to 33 bags.

Good to know

  • Brick sizes vary by type and region. Measure one of yours before ordering.
  • A wall two bricks thick needs twice as many. Brick veneer over a framed wall is one brick thick.
  • Bricks are usually sold by the cube or pallet of around 500. Order from one batch so the colour matches.
  • Veneer also needs wall ties, flashing and weep holes. Your code sets the spacing.

Common questions

How many bricks in a square foot?

About 6.9 for modular brick with a ⅜ inch joint. Larger bricks such as queen or king size need fewer.

Does this work for pavers laid flat?

Use the paver calculator for those. It also works out the base and sand.

How we know this calculator is right

Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: masons.