Every Single CalculatorOne place for every calculator

Sprinkler zone calculator

How many zones a sprinkler system needs from the heads and the water available.

Example: You are laying out a system with 12 rotors on a small supply.

Your numbers

Every zone must use less water than the supply can deliver.

gpm
gpm
%
  • Zones0
  • Heads per zone0
  • Flow of all heads0

How it is worked out

Heads per zone = usable flow ÷ flow of one head, rounded down

Zones = heads ÷ heads per zone, rounded up

A worked example

With 10 gallons a minute and 80% of it used, each zone has 8. Heads at 3 gallons a minute fit 2 to a zone, so 12 heads need 6 zones.

Good to know

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: irrigation installers.