Every Single CalculatorOne place for every calculator

Stone veneer calculator

Enter the wall size and the length of outside corners to find the flats and corner pieces to order.

Example: A customer wants stone on the front of the house below the windows, wrapped round two corners.

Your numbers

Flats are sold by the square foot and corners by the linear foot. Each foot of corner covers about three quarters of a square foot of wall.

ft
ft
sq ft
ft
Total height of all corners.
%
Drawn from your numbers. It redraws as you type.
  • Flat stone0
  • Corner pieces0
  • Wall area0

Stone veneer calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How it is worked out

Flats = (wall area − openings − corner feet × 0.75) × (1 + waste)

A worked example

A wall 20 by 4 feet is 80 square feet. Eight feet of corners cover 6 of them, leaving 74. With 10% waste, order 81.4 square feet of flats and 8.8 feet of corners.

Good to know

  • The 0.75 figure is the usual one for manufactured stone. Check your maker's sheet.
  • Tight dry-stack patterns waste more than grouted ones. Use 10 to 15%.
  • Veneer needs the right backing: a water barrier, lath and a scratch coat on framed walls.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: masons, siding and gutter installers.