How it is worked out
Bags = area × (1 + waste) ÷ coverage per bag
A worked example
One hundred square feet with a ¼ inch square notch, plus 10%, is 110 square feet. At 90 square feet a bag that is 1.2, so buy 2 bags.
Good to know
- Coverage figures are typical for a 50 pound bag. Large format tile mortars and back-buttering use more.
- Mix only what you can use in the pot life on the bag.
- The tile calculator counts the tile.
How we know this calculator is right
Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.