How the volume is worked out
Cubic yards = length × width × (depth ÷ 12) ÷ 27
A cubic yard is 3 feet by 3 feet by 3 feet, which is 27 cubic feet.
A worked example
An area 20 by 10 feet filled 6 inches deep is 100 cubic feet, which is 3.7 cubic yards.
Good to know
- Concrete, gravel, soil, mulch and sand are all sold by the cubic yard, so this one figure works for any of them.
- One yard covers 81 square feet at 4 inches deep, 108 at 3 inches and 162 at 2 inches.
- Loose materials settle and compact. Add 5 to 10% for mulch and soil, and 10% or more for gravel that will be compacted.
- To convert to tons, multiply by the weight of a yard: about 1.4 for gravel, 1.35 for sand and 1.1 for topsoil. The gravel calculator does that for you.
Common questions
How much does a pickup hold?
A full-size bed holds about 2 cubic yards of mulch by volume, but only about 1 yard of gravel or soil before it is overweight.
How we know this calculator is right
Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.