Every Single CalculatorOne place for every calculator

Linear feet calculator

Total linear feet and cost from a number of pieces and their length.

Example: A supplier quotes trim by the foot and you have a cut list in pieces.

Your numbers

Trim, lumber, pipe and gutter are all priced by the linear foot.

ft
$
  • Total length0
  • Cost0

How it is worked out

Linear feet = pieces × length

Cost = linear feet × price per foot

A worked example

Twenty 8 foot boards are 160 linear feet. At 75 cents a foot that is $120.

Good to know

  • A linear foot is just a foot of length, whatever the width.
  • For hardwood sold by volume, use the board foot calculator.

How we know this calculator is right

Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: framers and carpenters, finish carpenters, cabinetmakers and woodworkers, deck and fence builders, handymen.