Every Single CalculatorOne place for every calculator

Dumpster size calculator

Enter the rough size of the debris to find how many cubic yards it is and which dumpster to order.

Example: You are gutting a kitchen and need to pick between a 10 and a 20 yard dumpster.

Your numbers

Picture the debris stacked as a block and enter its length, width and height. Loose debris takes more room than you expect, so the calculator adds a quarter.

ft
ft
ft
%
Drawn from your numbers. It redraws as you type.
  • Dumpster to order0
  • Debris, loosely packed0
  • Debris, stacked tight0
  • Loads0

How the size is worked out

Cubic yards = length × width × height ÷ 27 × (1 + extra for loose packing)

A worked example

Debris that would stack into a block 12 by 8 by 4 feet is 14.2 cubic yards. Thrown loosely into a dumpster it takes about 17.8, so a 20 yard dumpster is the one to order.

Good to know

  • Common sizes are 10, 15, 20, 30 and 40 cubic yards. A 10 yard dumpster is roughly three pickup loads.
  • Every dumpster has a weight limit, and heavy debris reaches it long before the box is full. Concrete, dirt, brick and shingles usually need a small dumpster ordered specifically for heavy material.
  • For a roof, use the roof tear-off calculator, which works by weight.
  • Ask what is not allowed. Paint, tyres, batteries, appliances and mattresses often cost extra or are refused.
  • A dumpster on the street usually needs a permit.

Common questions

Should I size up?

If you are between sizes, yes. The price difference between sizes is usually much less than a second haul.

How we know this calculator is right

Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: roofers, drywall hangers and finishers, excavation and grading, tree service and firewood, remodelers and general contractors, homeowners.