How it is worked out
Pounds per foot = 10.69 × (outside diameter − wall) × wall
A worked example
Four inch schedule 40 pipe is 4.5 inches outside with a 0.237 inch wall: 10.69 × 4.263 × 0.237 is 10.8 pounds a foot, so a 21 foot length weighs 227 pounds.
Good to know
- This is for carbon steel. Stainless is about 2% heavier and aluminum about a third of the weight.
- Use it for freight and handling. Lifting gear must be rated by its maker.
How we know this calculator is right
Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.