Every Single CalculatorOne place for every calculator

Sealcoating calculator

Enter the size of the asphalt and the number of coats to find the sealer to buy.

Example: You are quoting a sealcoat on a two-car driveway and need the pails for two coats.

Your numbers

Coverage is on the pail. Rough or old asphalt soaks up more on the first coat.

ft
ft
sq ft
Drawn from your numbers. It redraws as you type.
  • Sealer needed0
  • 5 gallon pails0
  • Area0

Sealcoating calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How it is worked out

Gallons = length × width × coats ÷ coverage per gallon

A worked example

A drive 50 by 20 feet is 1,000 square feet. Two coats at 80 square feet a gallon take 25 gallons, which is 5 pails.

Good to know

  • Fill cracks and let patches cure before sealing.
  • Two thin coats last longer than one heavy one.
  • New asphalt needs to cure, often 6 to 12 months, before its first seal.

How we know this calculator is right

Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: paving and sealcoating.